CDR-5050 series
Description
Available in 4 - 6 - 8 and10 cubic yards
- 12 ga. steel outside walls and inside separation wall
- 11 ga. steel floor with profiled full floor length capped bottom channels
- 3/16" Side pockets
- (2) 14 ga. steel lids with polyethylene sliding access door.(available in 4-6-8 cu. yd.),
or (2) 14 ga. steel lids and (2) side access polyethyelene lids (available in 8 and 10 cu. yd.). - Swivel lock - release mechanism to select the opening of one compartment at a time for dumping.
- One coat of primer and two coats of industrial paint (standard 1 color)
- Compartment identification: Waste logo 16" x 18" and Recycling logo 16" x 18"
- Identification open - close of each compartment
- No parking Identification 6" x 6"
Tech Sheet *
| CDR-1XX-XXXX dimensions (overall) | ||||
| Model | CDR-104 | CDR-106 | CDR-108-LP | CDR-110-LP |
| Volume | 4 yd3 | 6 yd3 | 8 yd3 | 10 yd3 |
| Weight | 1,115 lbs | 1,336 lbs | 1,541 lbs | 1,710 lbs |
| Length | 82 3/4" | 82 3/4" | 82 3/4" | 82 3/4" |
| Width | 56 1/2" | 74 3/4" | 88 3/4" | 88 3/4" |
| Height | 73 3/4" | 71" | 77 3/4" | 89 1/2" |
| Loading height | 51 3/4" | 51 3/4" | 51 1/2" | 63 1/2" |
| Loading height (lateral door) | 43 3/4" | |||
| Lateral doors, steel (1/side) | (2) 29 1/4" x 22 1/2" |
| CDR Version | 5050 | 4060 | 6040 |
| Sliding polyethylene lids | (2) 30" x 30" | (1) 24" x 30" (1) 30" x 30" |
(1) 30" x 30" (1) 24" x 30" |
| Compartment widths | 36 1/4" | 29 1/4" | 43" |
* Sizes and specifications are provided as indications. Actual specifications may vary.
Specifications
FACING THE CONTAINER: 50 % WASTE LOCATED ON THE DRIVER SIDE/ 50 % RECYCLING LOCATED ON THE PASSENGER SIDE
12 gage steel outside walls and inside separation wall.
10 ga steel floor with profiled full floor length capped bottom channels.
3/16" side pockets.
(2) 14 gage steel lids with polyethylene sliding access door.
Swivel lock - release mechanism to select the opening of one compartment at a time for dumping.
FINISH:
Degreasing of the surfaces and a complete high pressure steam wash.
(1) Coat of industrial primer 1.5 mil dry.
(2) Coats of industrial enamel 1.5 mil dry.
Color: customer's choice (standard painted 1 color)
Compartment Identification: waste logo 16" x 18" and recycling logo 16" x 18".
Identification on how to open - close each compartment.
No parking decal 6" x 6".
Videos
Waste and recycling container dumping
