Eco-Splitter - Rear loader

Description

The Eco-Splitter is a revolutionary split-loader, ideal for superior productivity in operations requiring material sorting (domestic trash / recyclables • organics / recyclables • wet / dry • etc). It features two robust packing compartments specially designed for clean and highly productive recycling operations.

20 to 32 cubic yard capacities.

Tech Sheet

BODY
Floor: 3/16" (4.76 mm) 100 000 PSI QT-100 (single sheet, curved).
Side wall: 1/8" (3.17 mm) 180 000 PSI Hardox 450 (single sheet).
Roof section: 1/8" (3.17 mm) 180 000 PSI Hardox 450 (single sheet).
Horizontal side post: 1/8" (3.17 mm) 44 000 PSI.
TAILGATE
Hopper floor: 3/8" (9.53 mm) 180 000 PSI Hardox 450.
Wall exposed section: 3/16" (4.76 mm) 100 000 PSI QT-100.
Non-exposed section: 10 g. 44 000 PSI.
Carrier plate/rail: 1/4" (6.35 mm) 100 000 PSI QT-100, with replaceable wear UHMW shoes.
Removable cover: 1/16" (1.587 mm) 14 ga.
Side renforcement: 3/16" (4.76 mm) High tensile, fully welded with drain holes.
Tailgate seal “P" type: 84” high on each side.
Tailgate latche: Auto locking system.
Hopper capacity: 3 Cubic yards.
Séparations: 40/60 or 60/40 (sealed)
Séparation wall: 1/2'' (12.7mm) 180,000 PSI (single sheet)
SWEEP BLADE
Cylinder bracket: 1/2" (12.70 mm) 100 000 PSI QT-100.
Packing face: 1/4" (6.35 mm) 100 000 PSI QT-100.
Hydraulic cylinder: 5" (127 mm) bore with chrome rod.
Blade hinge bushing 2 1/2" (50,8 mm) aluminium bronze.
Séparation: 40/60 or 60/40 (mono-block)
LIGHTS
Compliance: FMWSS/CMVSS compliant.
Layout: 2 Turn & stop light above hopper each side.
1 Turn & stop light bellow hopper each side.
1 License plate light above hopper.
1 Turn signal on half body each side.
CARRIER PLATE
Face plate: 3/16" (4.76 mm) 100 000 PSI QT-100.
Cylinder bracket: 1/2" (12.70 mm) 100 000 PSI QT-100.
Hydraulic cylinder: (2) 5" (127 mm) bore with chrome rod.
PUMP
Installation type: On crank shaft or P.T.O. mounted.
Pump type: Vane 38gpm @1,200rpm.
EJECTOR PANEL
Quantity: 1 in each compartment
Front: 3/16" (4.76mm) 100 000 PSI.
Reinforcement: 4" Channel (101.6mm) 44 000 PSI.
Wear pad: 8 Replaceable UHMW (nylon)
Ejector track: 1/4" (6.35mm) 44 000 PSI fully welded.
Hydraulic cylinder: Telescopic - chrome rod
ACCESSORIES/STANDARD
Buzzer: 1 Push button curb side.
Hopper light: 1 Light inside hopper.
Access door: 2 sides of body.
Hopper control: 1 Set street side.
Back-up alarm: Backup alarm activated/ tailgate up.
Reflecting tape: Each side of body and tailgate.
RETAINING SYSTEM
Location: On 40 side only
Floating partition: 3/8" (9.5 mm) 100 000 PSI QT-100 (single sheet).
Fonctionning: Gravitational.
PAINT
Paint colour: Standard white. Sandblasted, epoxy primed with two (2) coats of high quality polyurethane.
HYDRAULIC
Tank: Outside on frame / passenger side (70 US, gal / 265 liters)
Ejection/Tailgate control: Front of body/ street side.
COMPACTION RATE
Standard cyl. compaction rate 1000 lb. (454 kg) by cubic yard

 

Photos

  • Eco-splitter rear loader

    Eco-splitter rear loader

  • Eco-splitter rear loader

    Eco-splitter rear loader

  • Eco-splitter rear loader

    Eco-splitter rear loader

  • Eco-splitter rear loader

    Eco-splitter rear loader

  • Eco-splitter rear loader

    Eco-splitter rear loader

Videos

Rear loader

Drawings

Dual chambered rear loader - Eco-Splitter
Dual chambered rear loader - Eco-Splitter

Dual chambered rear loader - Eco-Splitter