Sprinter (SPR) - Rear loader

Description

Chagnon’s traditional best-seller, the Sprinter series regroups remarkable features that appeal to operations involving superior compaction ratios on weight sensitive areas. The Sprinter is an outstanding rear loader, well known for its unequaled weight transfer, superior productivity, exceptional durability and very low maintenance requirements.

20 to 32 cubic yard capacities.

Tech Sheet

BODY
Floor 3/16" (4,.76 mm) 100 000 PSI QT-100 (single sheet, curved).
Side wall 1/8" (3.17 mm) 180 000 PSI Hardox 450 (single sheet).
Roof section 1/8" (3.17 mm) 180 000 PSI Hardox 450 (single sheet).
Horizontal side post 1/8" (3.17 mm) 44 000 PSI.
TAILGATE
Hopper floor 3/8" (9.53 mm) 180 000 PSI Hardox 450.
Walls 3/16" (4.76 mm) 100 000 PSI QT-100.
Carrier plate rail 1/4" (6.35 mm) 100 000 PSI QT-100, with replaceable wear UHMW shoes.
Removable cover 1/16" (1.587 mm) 14 ga.
Side renforcement 3/16" (4.76 mm) 44 000 PSI, fully welded with drain holes.
Tailgate "P" seal 84” high on each side.
Tailgate latch Auto-locking system.
Hopper capacity 3 cubic yards.
SWEEP BLADE
Cylinder bracket 1/2" (12.70 mm) 100 000 PSI QT-100.
Packing face 1/4" (6.35 mm) 100 000 PSI QT-100.
Hydraulic cylinder 5" (127 mm) bore with 3 1/2"chrome rod.
Blade hinge bushing 2 1/2" (50.8 mm) aluminium bronze.
CARRIER PLATE
Face plate 3/16" (4.76 mm) 100 000 PSI QT-100.
Cylinder bracket 1/2" (12.70 mm) 100 000 PSI QT-100.
Hydraulic cylinder (2) 5" (127 mm) bore with 3 1/2" chrome rod.
PUMP
Installation type Outside on frame - curb side - 70 gal.
Pump type Vane 38gpm @1,200rpm.
EJECTOR PANEL
Front 3/16" (4.76 mm) 100 000 PSI QT-100.
Reinforcement 4" Channel (101.6mm) 44 000 PSI.
Wear pad 8 Replaceable UHMW (nylon)
Ejector track 1/4" (6.35mm) 44 000 PSI fully welded.
Hydraulic cylinder Telescopic - chrome rod
LIGHTS
Compliance FMWSS/CMVSS compliant.
Layout 1 Turn & stop lights above hopper - each side. 1 Turn & stop light bellow hopper - each side. 1 License plate light above hopper. 1 Turn signal mid body - each side.
PAINT
Paint colour Standard white. Sandblasted, epoxy primed with two (2) coats of high quality polyurethane.
HYDRAULIC
Tank Outside on frame - curb side - 70 gal.
Ejection/Tailgate control Front of body - street side.
ACCESSORIES/STANDARD
Buzzer 1 Push button curb side.
Hopper light 1 Light inside hopper.
Access door 1 Streetside.
Hopper control 1 Set curb side.
Reverse warning signal Reverse signal activated - tailgate up.
Reflective tape Each side of body and tailgate.
COMPACTION RATE
Standard cyl. compaction rate 1000 lb. (454 kg) by cubic yard

 

Photos

  • Sprinter rear loader

    Sprinter rear loader

  • Sprinter rear loader

    Sprinter rear loader

  • Sprinter rear loader with hopper and articulated arm to service inground containers.

    Sprinter rear loader with hopper and articulated arm to service inground containers.

Videos

Rear loader

Drawings

Sprinter rear loader
Sprinter rear loader
Dimensions 18 y3 20 y3 25 y3 29 y3 32 y3
Body length (A) 218" 247" 269" 286" 308"
Body height 99 1/4"
Overall height 122 1/2"
Hopper width (inside) 80"
Overall width 102"
Hopper opening height 58 1/2"