DRC-OR 20,000 lb. series · Outside rails roll-off system

Description

With 20 000 lb. of total capacity and a standard 5/8" hoist cable (6X26 - 41,000 lb.), our DRC-20XX-OR roll-off system has been carefully designed to be a lightweight model ideal for small trucks, while remaining a sturdy product of superior quality, easy to maintain and operate.  Assembly quality exceeds all industry standards (ANSI Z245.1, CSA W47.1, FMVSS/CMVSS, WASTEC, ect.)

 

Tech Sheet *

GENERAL SPECIFICATIONS, DRC-OR SERIES 20,000 LB. CAPACITY
Model DRC-2016-OR
Length 16'
Hoist Frame 6" x 3" x 1/4" tubing
Top rail wear strip PL 1/4" x 2 1/2" x 6'  44W
Hinges 1 1/2" diam. shaft
Front stopper 3/4'' thick 44W
Winch cable 5/8'' 6X26 41,000 lb. capacity
Hook 9" - ''D'' ring pivoting hook (44W)
Wear pads Nylatron 1/4'' x 1 3/4" x 10 1/2"
Rear roller 4 1/2'' diam. x 26'' long
Side rollers 3 1/2" diam. x 4" long with aluminum bronze bushing (housing included) and" dia. shaft with lubrication point.
Winch sheavers (2) 7" sheave with 1 1/2" shaft - (1) 5'' sheave with 1 1/2'' shaft
CYLINDERS
Double Action - Lifting cylinders 4" bore
Double Action - Reeving cylinders 4" bore
FINISH
Color Black. Sandblasted, epoxy primed with two (2) coats of high quality polyurethane
CONTROLS
Inside cab controls Air
Outside cab controls Manual
HYDRAULIC SYSTEM
Tank 30 gal. (110 liters)
Return filter 10 Microns, installed in the tank
Pumps 23 GPM - gear
SUGGESTED EQUIPMENT (optional)
P.T.O. On crankshaft front mount
On crankshaft rear engin PTO (REPTO)
PTO on manual transmission
PTO on automatic transmission
Pump installation Directly to P.T.O. (option: on engine - Front mount)
Hydraulic distribution VD12 double action
STANDARD ACCESSORIES AND EQUIPMENT
Safety bracket Steel, street side
Back-up alarm Back-up alarm activated when vehicle reverses
ELECTRICAL SYSTEM
Compliance FMVSS/CMVSS approved L.E.D.
Wiring 100% waterproof
Lighting (2) L.E.D. back-up lights (1/side)
(4) L.E.D. stop lights (2/side)
(1) L.E.D. licence plate light
(1) L.E.D. three-way light with MTC compliance (mid-bumper)
(2) Side reflectors (1/side)

 

* Sizes and specifications are provided as indications. Actual specifications may vary.

Specifications

The system must be compliant with the AINSI  Z-245.60 2008 safety standard, all safety labels must be in the working language, the system must be compatible with U-type cable containers. It shall be manufactured with  the highest quality standards, construction plans must be approved by an engineer member of an accredited board, assembled and welded  in accordance with the Canadian Welding Bureau (CWB) requirements.

 

Lifting system:

  • 20,000 lbs lifting capacity.
  • Frame length 16', 138'' requested C.L.A. for air suspension or 134" requested C.L.A. for spring suspension (Including the necessary space for a tarping system).
  • Frame lifting tubes: 6" x 3" x 1/4" tubing  (no subframe required).
  • Mobile carrier includes Nylatron 1/4 " x 1 3/4'' x 10 1/2'' wear pads.
  • 5/8'' hoist cable 6 x 26 of 41,000 lb. capacity with a 9" pivoting ''D-ring'' to increase flexibility and strength.
  • Winch sheaves:
    • (2) 7 '' Sheave with 1 1/2 '' shaft
    • (1) 5 '' Sheave with 1 1/2 '' shaft
  • 3 1/2" dia. x 4" long side rollers with 2 1/2'' shaft, aluminum bronze bushing with lubrication point and welded supports (quantity: at least 3/side), addition of  3/8" x 4" flat bar between rollers to secure container movement.
  • Welded wear plates on rear of frame lifting tubes: 1/4" x 2 1/2" x 6'.
  • Rear ground roller between lifting tubes (or stigner tail) 4 1/2" dia. x 26" long.
  • 3/4" Fixed front stopper.
  • 3/4" removable stopper with sealed welded inserts (insert positions according to customer request), allowing various container lengths.
  • 1 1/2" hinge shaft.
  • Steel safety post that supports the frame during maintenance on the driver’s side.

 

Hydraulic:

  • 30 gallons tank (110 liters).
  • 10 micron filter installed in the tank with oil level and temperature indicator.
  • Distribution by double-action VD12 hydraulic valve.
  • Lifting Cylinder (Side) 4'' bore.
  • Winch Cylinder 4'' bore.
  • Ergonomic control box inside the cab, pneumatic controls on hydraulic.
  • Outside cab manual hydraulic controls with 23 GPM.


Electric:

  • Electrical system approved FMWSS / CMVSS L.E.D.
  • All wiring is 100% waterproofed
  • Lighting arrangement on the bumper: 
    • (2) L.E.D. back-up lights (1/side)
    • (4) L.E.D. stop lights (2/side)
    • (1) L.E.D. licence plate light
    • (1) L.E.D. three-way light with MTC compliance (mid-bumper)
    • (2) Side reflectors (1/side)


Security:

  • All lights are LED.
  • Robust safety holder.
  • Fastener belt for container.


Finition:

  • Black. Sandblasted, exposy primed with (2) coats of high quality polyuréthane.

 

Options

 

  • Additional axles (Steerable lift or Self steer lift)
  • On board scale system
  • Telescopic cylinder
  • Increase of the hydraulic reserve
  • Biodegradable hydraulic oil
  • Automatic greasing system
  • Transmission or motor programmation system
  • Tarping system
  • Stinger tail
  • Removable stoppers and sleeve inserts
  • Roller side 5 1/2''
  • Wear plates on frame, full length 1/2'' x 3''
  • Checker plate, Steel plate, Galvanized steel or Polyethylene fenders for axles tandem
  • Additional supports between rollers
  • Ready to receive live or dead pup trailer structural assembly, includes hydraulic connector
  • Pintle hook trailer hook-up with air lock
  • Auto-retract bed mounted rear under ride ICC mechanical bumper
  • Rear stabilizer
  • Crosby or Gunnabo hook
  • Complete installation. Ointle ready rear apron
  • Assortiment of pumps and PTO. 
  • Additonnal valve section and quick coupler 3/4'' hoses to receive additional accessories
  • Extended warranty
  • L.E.D.Work lights
  • Alarm (light/ sound) when hoist's up
  • Toolbox in aluminium or steel with support brackets
  • Shovel and support braket
  • Back-up camera
  • Extinguisher and support braket
  • Industrial broom with mounting braket
  • Other color than black (to specify)

Photos

  • 20,000 lb. capacity roll-off cable hoist system

    20,000 lb. capacity, 16' roll-off system

  • 20,000 lb. capacity roll-off cable hoist system

    20,000 lb. capacity, 16' roll-off system

  • 20,000 lb. capacity roll-off cable hoist system

    20,000 lb. capacity, 16' roll-off system

  • 20,000 lb. capacity roll-off cable hoist system

    20,000 lb. capacity, 16' roll-off system

Videos

Chagnon roll-off system, in action.

Drawings *

DRC-OR 20000 lb series - outside rails
DRC-OR 20000 lb series - outside rails

 

MODEL

DRC-2016-OR
(suspension air)

DRC-2016-OR
(suspension ressort)

A

Dumping angle

47°

47°

B+40"

Hoist length - standard frame and optional 40" openned stinger tail

214"

214"

B

Hoist length with optional 40" closed stinger tail

174"

174"

C

Clearance from the rear cabin to the last axle, including space for the tarping system (C.L.A.)

138"

134"

D

Clearance from the rear cabin to the last axle, excluding space for the tarping system (C.L.A.)

126"

122"

 

* Sizes and specifications are provided as indications. Actual specifications may vary.